Description
12 Volt ‘Trailer Light Tester TLT9US’ Main Supplied from 120v and 240v possible.
12Volt Trailer Light Tester, test all circuits on a trailer
American configured Trailer light tester TLT9US – Suitable for USA users.
This 12v ‘Trailer light tester’ can test all 6 circuits on any trailer with matching trailer plug. Self protecting via its circuit breaker. Battery supplied. Volts display and external battery health displayed via the units volt meter. Switches on and off via an on off switch. Can test up to 25 amps before unit goes into trip mode and self resets to start testing again. Loads below 25amps hold their supply to trailer until mains is turned off or unit is turned of. Great for long time operations and testing. Built to last and last.
Perfect for warehouse use.
Trailer light tester box TLT9US mains supplied
Unit tripping times
- Holds loads of 25Amps till switched off
- Shorts, high to trailer chassis causes unit to trip instantly self reboots
Trailer Light Switch options
- Switch 1 – Yellow – Left turn.
-
Switch 2 – Red – Stop lights.
-
Switch 3 – Blue – Service brakes.
-
Switch 4 – Purple – Back Up Lights
-
Switch 5 – Brown – Tail lights.
-
Switch 6 – Green – Right turn.
Trailer tester with mains displayed
INPUT
- Full range 85~264VAC
- Withstand 300VAC surge input for 5 seconds
-
Input Frequency: 47-63Hz
-
Cold Start Inrush Current: 60A
OUTPUT
12 VOLTS via Trailer Plug
25 AMPS MAX
Protections : 15 Amp circuit breaker tested to trip at 22 amps max.
Trailer Light Tester Specs
- Specifications – TLT9US Mains supplied
- 12 Volts Digital volts display
- Dimensions in inches: 9.4 x 6.3 x 3
- Dimensions in millimetres: 240mm x 160mm x 75mm
- Weight: in pounds : 4.5.6LMB
- Weight: in Kilograms : 2.2KG
- Operating Temperature: 0 degrees – 40 degrees
- Manufactured in Australia
NOTE: Normally Ships within 2 business days from purchase – Tracking emailed once shipped, normally arrives 1 to 2 weeks later.
Reviews
There are no reviews yet.